SAE ARP1395 Minimum Requirements for Future Wide-Body Aircraft Cargo Systems and Compartments (Intermodal) (Cancelled Ma

作者:标准资料网 时间:2024-04-19 20:44:09   浏览:9168   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE ARP1395
Title:Minimum Requirements for Future Wide-Body Aircraft Cargo Systems and Compartments (Intermodal) (Cancelled Mar 2003)
Issuing Committee:Age-2a Cargo Handling Committee
Scope:The dedicated aircraft addressed herein is to be an uncompromised all-freighter aircraft developed primarily for use in the civil transport industry.The requirements of thsi document are applicable but not limited to airborne equipment which is subject to the airworthiness directives of FAR part 25 and which is designed to accmmodate unitized cargo in the form of intermodal containers and other compatible unitized load devices. Intermodability in the context of this document encompasses the air-truck-rail-sea modes, and considers uncertificated as well as certificated unit load devices (ULDs). This document covers the fundamental prerequisites for the aircraft cargo compartment and the onboard cargo handling and restraining system. The cargo system and compartment considers primarily 96 in (2.44 m) wide, multiple bottom configuration ULDs. The cargo system and compartment should handle outsize cargo and should consider Civil Reserve Air Fleet (CRAF) requirement compatibility. The cargo system, compartment, and the cargo-related aircraft physical features should be sufficiently defined to establish specifications for ground interface mobile and/or fixed loading equipment and facilities with a goal of standardization thereof. This document is intended to assist air carriers in standardizing to the degree necessary to insure the smooth flow of cargo between ground and aircraft and between various aircraft in the future. Thhis document is not intended to inhibit the development of new systems, but rather to establish a solid interface for the introduction of such systems.
下载地址: 点击此处下载
基本信息
标准名称:
英文名称:Bismuth
中标分类: 冶金 >> 有色金属及其合金产品 >> 重金属及其合金
ICS分类: 冶金 >> 有色金属产品 >> 其他有色金属产品
替代情况:替代GB/T 915-1995
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2011-01-14
实施日期:2011-07-01
首发日期:1966-04-18
作废日期:
主管部门:全国有色金属标准化技术委员会(SAC/TC 243)
提出单位:中国有色金属工业协会
归口单位:全国有色金属标准化技术委员会(SAC/TC 243)
起草单位:株洲冶炼集团股份有限公司、阳谷祥光铜业有限公司
起草人:谭仪文、徐永斌、范元俊、姜晴、陈迎武、张惠秀、翦爱民、周松林
出版社:中国标准出版社
出版日期:2011-07-01
页数:12页
适用范围

本标准规定了铋的要求、试验方法、检验规则和标志、包装、运输、贮存及质量证明书与合同(或订货单)内容。
本标准适用于火法精炼或电解精炼所生产的铋。该产品主要用于医药、化工、冶金添加剂及低熔点合金等。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版本均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T8170—2008 数值修约规则与极限数值的表示和判定
YS/T536(所有部分) 铋化学分析方法

所属分类: 冶金 有色金属及其合金产品 重金属及其合金 冶金 有色金属产品 其他有色金属产品
【英文标准名称】:StandardTestMethodforGrossMoistureinGreenPetroleumCoke
【原文标准名称】:新出炉的石油焦炭中总含水量的标准试验方法
【标准号】:ASTMD4931-2006
【标准状态】:现行
【国别】:美国
【发布日期】:2006
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:焦炭;含水量;试验
【英文主题词】:Coke;Moisturecontents;Testing
【摘要】:
【中国标准分类号】:E44
【国际标准分类号】:75_160_10
【页数】:4P;A4
【正文语种】:英语