SAE AIR1228 Standard Impulse Machine Equipment and Operation

作者:标准资料网 时间:2024-04-25 06:06:10   浏览:8788   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AIR1228
Title:Standard Impulse Machine Equipment and Operation
Issuing Committee:G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Scope: This information report establishes the part numbers and/or description of the critical components and operational guidelines for the Standard Hydraulic Impulse Machine for testing hydraulic hose assemblies, tubing, coils, and fittings and may be used for similar fluid system components, if desired. The Standard Impulse Machine is established for the following purposes:As referee in the event of conflicting data from two or more non-standard impulse machines. Such a referee machine might be built by an impartial testing activity;A design guide for future machines being built by manufacturers and users, or the upgrading of present machines;A design guide for higher pressure machines or special purpose machines being designed. It is not the intention of this information report to obsolete present machines.It is not the intention of this document to obsolete present machines.
下载地址: 点击此处下载
基本信息
标准名称:移动通信网业务拨测管理技术要求 第3部分:拨测管理系统与测试卡管理设备接口要求
英文名称:Mobile Network Service Dial Testing Management Technical Requirement Part 3:Dail Testing Management System And Testing Card Management Equipment Inteface Specification
中标分类: 通信、广播 >> 通信网 >> 各种通信业务服务
ICS分类: 电信、音频和视频技术 >> 电信业务、应用
发布部门:工业和信息化部
发布日期:2009-06-15
实施日期:2009-09-01
首发日期:
作废日期:
主管部门:中国通信标准化协会
提出单位:中国通信标准化协会
归口单位:中国通信标准化协会
起草单位:中国移动通信集团公司、北京邮电大学
起草人:徐姨莹、朱多智、舒波、芮兰兰、李文璟、柯小婉、熊翱
出版社:北京邮电大学出版社
出版日期:2009-09-01
适用范围

本部分规定了移动通信网移动业务拨测管理系统与测试卡管理设备接口要求。
本部分适用于移动通信网移动业务拨测管理系统与测试卡管理设备接口。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 通信 广播 通信网 各种通信业务服务 电信 音频和视频技术 电信业务 应用
基本信息
标准名称:钛铁 钛含量的测定 硫酸铁铵滴定法
英文名称:Ferrotitanium—Determination of titanium content—The ammonium ferric sulfate titration method
中标分类: 冶金 >> 金属化学分析方法 >> 钢铁与铁合金分析方法
ICS分类: 冶金 >> 铁合金
替代情况:替代GB/T 4701.1-1984
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2009-10-30
实施日期:2010-05-01
首发日期:1984-10-04
作废日期:
主管部门:中国钢铁工业协会
提出单位:中国钢铁工业协会
归口单位:全国生铁和铁合金标准化技术委员会
起草单位:四川川投峨眉铁合金(集团)有限责任公司
起草人:唐华应、方艳、吴翠萍、唐敏
出版社:中国标准出版社
出版日期:2010-05-01
页数:12页
计划单号:20074209-T-605
适用范围

GB/T4701的本部分规定了用硫酸铁铵滴定法测定钛铁中的钛含量。
本部分适用于钛铁中钛含量的测定。测定范围(质量分数):20.00%~80.00%。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过在GB/T4701的本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。
GB/T4010 铁合金化学分析用试样的采取和制备

所属分类: 冶金 金属化学分析方法 钢铁与铁合金分析方法 冶金 铁合金